Showing posts with label pattern. Show all posts
Showing posts with label pattern. Show all posts

Wednesday, August 1, 2012

Oh Yes, about That Sawtooth Edging Pattern

Well. I am a silly goose. I said I'd put the sawtooth edging at the end of yesterday's post, but I didn't. I am glad Kelli reminded me. It's really easy to memorize and works up fast, making nice right triangles. OK here goes:


Sawtooth Border Edging

Set Up: Start with all your last row of stitches on one needle, then CO 8

Row 1: PB, P1 (that's the stitch with the bead on it), K6, K2togW
Row 2 and every even row except 14: Sl1, K to end
Row 3: Sl1, K2tog, K4, K2togW
Row 5: Sl1, K2tog, K3, K2togW
Row 7: Sl1, K2tog, K2, K2togW
Row 9: Sl1, K2tog, K1, K2togW
Row 11: Sl1, K2tog, K2togW
Row 13: Sl1, K3togW
Row 14: Sl1, K1, CO6


Abbreviations:

  • CO: Cast on, preferably using knitted cast on. Alternative: backward loop cast on
  • PB: Place Bead (insert bead on crochet hook, catch next stitch on hook, slide bead over stitch, place stitch back on needle)
  • K2tog: Knit 2 together
  • k2togW: Knit last stitch of border together with next stitch on the body of the project (I admit I made that up)
  • K3togW: Knit last two stitches of border together with next stitch on the body of the project
  • Sl1: Slip 1
  • P: Purl
  • K: Knit

Please let me know if you try this and something doesn't work. Mainly I hope the set-up row is right.

Tuesday, April 26, 2011

Mitered Square Blanket Pattern

I got a lot of requests for the pattern for the blanket I am working on. So, I tried to write this out in a format that my beginning knitting students might also be able to use. There is probably far more detail here than an experienced knitter needs, but you can skip any part that's completely obvious to you!


Here are generic instructions for making a rectangle out of mitered squares. You can choose the yarn, colors and arrangement of squares to suit your taste. The photo at left shows a blanket made of worsted weight squares arranged in a 4-patch pattern with solids and variegated yarns. Extra technique explanations are given so the pattern can be used with new or beginning knitters.

Materials and Gauge: Any weight of yarn that you want to use. This project can consist of small squares from sock yarn, up to large squares from a bulky weight. Use something you have a lot of. You can use solids, self-striping or other types of yarn, and can use one color or multiples.

Needles: Use needles that give you a nice, solid garter stitch with the yarn you choose. I’d recommend for the average knitter, size 2 or 3 needles in fingering, 4 or 5 in sport, 5 or 6 in DK, 6-8 in worsted, and 8-10 in bulky weight. Use what you think looks good. You can use straight or circular needles.

Abbreviations and Techniques:
K = knit
K3tog = Knit three together OR any double decrease that appeals to you. I like [sl1, k2tog, PSSO (pass slipped stitch over)] and [Sl 2 tog as if to knit, K1, PSSO]. For a uniform look, pick one decrease style and stick with it.
Sl = Slip: move the next stitch to the right needle without knitting it. Be sure to move the yarn between the first and second stitch. This creates an easy edge for picking up stitches.
Pick up = Picking up stitches means to build a new row of loops on the edge of a piece of knitting. Usually, if you have slipped the first stitch of each row, you can create one stitch for each loop along the side. To do this, put the needle under the edge loop, wrap yarn around it, and bring it up, creating a stitch. Do this for each look. To get started, double the yarn for 2-3 inches and bring up the first look with from the loop this created, then for the first two or three stitches you pick up, use both pieces of yarn to anchor it. You can weave the rest in later.

First Square
Cast on 41 stitches.
Row 1 (wrong side): K across
Row 2 (Right side): Sl 1, K 18, K3tog, K19
Row 3: Sl 1, K across
Row 4: Sl1, K17, K3tog, K18
Row 5: Repeat row 3
Row 6: Sl1, K16, k3tog, K17

Repeat the pattern you see in rows 2-6. Slip one, knit to the center 3 stitches, knit those together and knit to the end, then Slip one and knit on the back side. Eventually you will have just 3 stitches. Knit them together and fasten off (if you are using one color, there is no need to fasten off).

Rest of First Row
Pick up 21 stitches, starting where you left off the previous square and going down, toward where the k3tog of the first square started (this will keep them all going the same direction—see illustration at the end). The last stitch will be in the corner. Cast on 20 stitches using the knitted cast-on method.

Row 1: K across
Rows 2 and forward: Same as for first square.
Repeat this square until your blanket is as wide as you want it to be.

Second and Subsequent Rows
First Square: Cast on 20 then pick up 21 sts in the loops on the top right square. Start in the corner. Repeat mitered square instructions from the first square.

Rest of row: Pick up 20 stitches down the side of the square you just finished. Pick up ONE stich in the center between the two squares you are working off. Pick up 20 more stitches across the square in the previous row. Repeat mitered square instructions.

Keep building rows of squares until the blanket is the size you want it to be.

Border
It looks nice to finish these projects with a garter stitch border. I usually pick up one stitch per loop across the top and knit in garter stitch for at least an inch in a color that coordinates with the project. Then I repeat at the bottom (you will be picking up from your cast on, but the knitted cast on makes loops it is pretty easy to pick up from. When you are finished with that, pick up across the border, the squares and the other border for each side.

Another option is to do it like a log cabin quilt and do the top, then a side, then the bottom, then the other side, picking up from each border you add as well as the squares.

Finishing
Weave in ends. If you do this neatly, the back will be nearly as pretty as the front.

This picture shows a blanket in progress. It is made with a DK weight self-striping yarn (James C. Brett Marble) in a variety of colorways, creating diagonal stripes from the squares.


Note that you don’t have to start with 41 stitches. Any odd number that works for you is fine. The idea is to slip the first stitch on each row and knit the center three stitches together on right-side rows while knitting the rest in garter stitch. By increasing or decreasing the number of stitches you start with, you will have larger or smaller squares. You can really be creative with sizes and colors of squares.

 ©2011 Sue Ann Kendall



PS: I'm no longer sending out PDFs of this, because I no longer use that email address. But if you want the pattern, click the Ravelry link above. (February 2016)

Tuesday, November 10, 2009

Textured Thumbless Mitts Pattern

As promised, here is the pattern for the mitts I made. I hope you enjoy them. If you make them, please link to the pattern on Ravelry, so it will look like someone knits my patterns.

Textured Thumbless Mitts

©2009 by Sue Ann Kendall
Soft and warm unisex mitts using a variety of interesting textures. A good beginning pattern for knit and purl patterns and knitting in the round.
Materials:
One skein worsted weight yarn (4 oz. skein will make two pairs). I used Malabrigo worsted in the colorway "Hummingbird," which has smaller skeins, and I still didn't use all the skein.

US size 6 circular needles, or size to get 6 stitches per inch. This is most easily done using magic loop or two circular technique.



Abbreviations:
k = knit
p = purl
st/sts = stitch/stitches
* repeat material between asterisks

Seed stitch (even number of stitches, worked in the round):
Row 1: *k1,p1*
Row 2: *p1,k1*

Stockinette stitch (worked in the round):
Row 1: knit across

Moss stitch (even number of stitches, worked in the round):
Row1-2: *k1,p1*
Row3-4: *p1,k1*

Linen Stitch (even number of stitches, worked back and forth):
Row 1 Slip 1, p across.
Row 2: Slip 1 (as if to purl), *Slip 1 with yarn in front, k1* until last two sts; k2.
Row 3: Slip 1, p across.
Row 4: Slip 1, *k1, slip 1 with yarn in front,* until last st, k1.


Mitts (make two!):
Cuff

Cast on 34 sts.(40 for larger size). join for knitting in the round, being careful to not twist stitches. (You can divide the yarn among 3 or 4 double points or use Magic Loop, which is how I do it.)
Work in Seed st for 7 rows.
Work in Stockinette st for 14 rows .
Start with Moss stitch, and repeat the pattern rows 4 times (16 rows), ending with row 4.
Purl one row.

Hand

Begin working back and forth. This creates the opening for the thumb.
Work 16 rows in linen stitch, ending on Row 3.
Rejoin for circular knitting and KNIT Row 4 from the front of the mitts.
Purl one row.
Work 4 rows in Stockinette st and then 4 more rows in Seed st.
Bind off loosely in Seed st. If you knit tightly, consider using a larger needle to bind off.

Finishing:
Weave in the ends, and you are done! Optionally, you could single crochet around the thumb hole. I've done that on some of the later ones I made.

Sunday, June 29, 2008

Instant Sock Pattern

Today I bring you a pattern for the socks I use in my "Instant Sock" class. It's a very quick knit, thanks to using worsted weight yarn at a large gauge for socks. They end up being "house socks," not something you could wear with shoes.

There are two versions or the pattern, one for the knitter and one for the teacher. Click here for the teacher version. You are welcome to print these out and use them for teaching, because I know how hard it is to find materials with permission to use in a class!

Instant Socks

By Sue Ann Kendall

Top-down house socks in worsted weight yarn using magic loop technique. Perfect as a first sock project, and especially well suited to teaching magic loop socks in a day, because the short top lets you spend more time on the heel section, and in a long enough class you can get all the way to the toe.

Materials

Worsted weight yarn, approximately 200 yards

32-inch circular needle, size 4 or size to get gauge.

Spare double pointed or circular needle if using 3-needle bind-off.

Gauge

5 stitches per inch

Sporty Short Leg

Cast on 40 stitches. Good cast-ons include the knitted and long tail. Just make sure you use one that is stretchy.

Divide the needle so that there are 20 stitches on each half. Use magic loop technique to knit 5 rows in k2, p2 ribbing, then 5 rows of stockinette (knit each stitch).

Heel

You will work the heel back and forth on half of the stitches.

Flap:

Row 1: slip 1, k1 across the 20 stitches. Turn.
Row 2: slip 1, p to end of row.

Repeat these two rows until you have completed 20 rows (you will see 10 raised slip stitch columns).

Turn heel:

K 12, SSK, k1, turn
P 5, p2tog, p1, turn
K 6, SSK, k1, turn
P 7, p2tog, p1, turn
K8, SSK, k1, turn
P 9, p2tog, p 1, turn
Continue in this pattern until there are no stitches left unworked on either end (should be a purl row). Knit across.

Gusset

Pick up one stitch in every slipped stitch on the side of the heel flap after your knitted row. 10 stitches added. Resume knitting in the round, and knit across the side that has been resting (this is the top of the foot, or “instep”). Be sure to knit the first stitch tightly, to avoid a hole at this transition. The instep stitches will simply be knit on each round until you get to the toe.

Shift your needles as if you are about to start the other side, then pick up 10 stitches along the other side of the heel flap, one stitch in each slipped stitch. Continue and knit across the heel and the stitches you picked up earlier (these stitches are the foot and gusset, all one one needle) until the last three stitches, then k2tog, k 1.

Next:
Row A: knit across instep stitches; on foot side k 1, SSK, k across.
Row B: knit across instep stitches; on foot side, knit to last 3 stitches, k2tog, k 1.
Repeat these two rows until you have 20 stitches on the foot side.

Foot

Knit in the round until the sock is long enough to cover the tip of your little toe. You can try on your sock at any time by moving the stitches to the cable part of the needle. It will stretch.

Toe

Row A: k 1, SSK, knit to last 3 stitches, k2tog, K1; repeat on other half of round.
Row B: Knit.
Repeat these two rows until you have 8 stitches left on each half of the sock. Graft the 8 stitches together and fasten off.

OR

Repeat these two rows until you have 10 stitches left, then repeat Row A only until you have 4 stitches on each half of the round. Cut the yarn, leaving a 10-inch or longer tail. Poke this yarn to the inside of the sock, and poke your needles to the inside as well. Turn the sock inside out and straighten the needles so they are parallel again. Then, use a spare double pointed needle to use the 3-needle bind off technique to secure the 4 remaining stitches on each side of the sock.

Weave in your ends, turn the sock right-side out if you need to, and admire your new instant socks.

Copyright ©2008 Sue Ann Kendall





Instant Socks, with teaching tips

By Sue Ann Kendall

Top-down house socks in worsted weight yarn using magic loop technique. Perfect as a first sock project, and especially well suited to teaching magic loop socks in a day, because the short top lets you spend more class time on the heel section, and in a long enough class you can get all the way to the toe. An average knitter can easily knit at least one of these in a day. This version of the instructions has teaching tips for each section, marked with a ***and italic text.

***Most knitters can complete one of these in four hours, especially if you make a “class sock” with a shortened foot section.

Materials

Worsted weight yarn, approximately 200 yards—machine washable is preferable

*** Suggest students use light-colored yarn, so they can see their stitches more easily.

32-inch circular needle, size 4 or size to get gauge.

***If you know your students knit very tightly or loosely, adjust the size. I knit loosely, so should have used size 3.

Spare double pointed or circular needle if using 3-needle bind-off.

***Students who are afraid of grafting may prefer this method.

Gauge

5 stitches per inch

***On this practice sock, don’t spend a lot of time knitting swatches.

Sporty Short Leg

Cast on 40 stitches. Good cast-ons include the knitted and long tail. Just make sure you use one that is stretchy.

***Here is where you can teach a new cast-on, if desired. It’s always good for knitters to know a variety of techniques. The backward loop method is a spectacular failure for sock legs, so steer students away from that one.

Divide the needle so that there are 20 stitches on each half. ***I find it easiest to demonstrate how the magic loop set up and start works, then watch each student as she or he starts their sock. That avoids unexpected twisting or big gaps in the first stitch, so they will have a more successful experience. If you want to show them the technique of casting on one extra then knitting the last stitch together with the first, you can.

Use magic loop technique to knit 5 rows in k2, p2 ribbing, then 5 rows of stockinette (knit each stitch). If you have time and sufficient yarn, you can make the leg as long as you want.

***Explain to them how to avoid gaps between the halves of the row, and remind them to move the yarn to the right position at the start of each half, since they are doing ribbing. When they are working on the easy part and getting used to the magic loop technique is a good time for introductions and for finding our if they have the skills needed for the heel (picking up stitches, SSK, k2tog, p2tog).

Heel

You will work the heel back and forth on half of the stitches.

***Stress this.

Flap:

Row 1: slip 1, k1 across the 20 stitches. Turn.
Row 2: slip 1, p to end of row.
Repeat these two rows until you have completed 20 rows (you will see 10 raised slip stitch columns).

***Point out that they will not slip as if to knit—the slipped stitch needs to just transfer to the needle in the orientation it is already in. Tell them why the flap uses slip stitch technique, and point out that the slipped stitches make it easy to figure out where you are on the flap. Mention that they will use the slipped end stitches later. Check their work frequently.

Turn heel:

K 12, SSK, k1, turn
P 5, p2tog, p1, turn
K 6, SSK, k1, turn
P 7, p2tog, p1, turn
K8, SSK, k1, turn
P 9, p2tog, p 1, turn
Continue in this pattern until there are no stitches left unworked on either end (should be a purl row). Knit across.

***Go over the directions before they start the heel turn, pointing out the pattern. You can mention that a way to figure out where to start the heel is to knit half the stitches on the needle plus two, then SSK, K1, tuen. Next P5, p2tog, p1, turn. This will work no matter how many stitches are on your sock if there is an even number. You just do more short rows on socks with more stitches.

***Show them how you don’t really have to count—you always do SSK or p2tog on the two stitches on either side of the short row gap.

***Make sure they end up on the correct side of the sock to do the gusset pick-up.

Gusset

Pick up one stitch in every slipped stitch on the side of the heel flap after your knitted row. 10 stitches added. Resume knitting in the round, and knit across the side that has been resting (this is the top of the foot, or “instep”). Be sure to knit the first stitch tightly, to avoid a hole at this transition. The instep stitches will simply be knit on each round until you get to the toe.

***If you want to show them your favorite techniques for snugging up the hole, now’s the time. On these loosely knit socks, gaps are hard to avoid. Let them know that even good sock knitters sometimes have the hole.

Shift your needles as if you are about to start the other side, then pick up 10 stitches along the other side of the heel flap, one stitch in each slipped stitch. Continue and knit across the heel and the stitches you picked up earlier (these stitches are the foot and gusset, all one one needle) until the last three stitches, then k2tog, k 1.

***Make sure they don’t try to put all the stitches on one half of the sock. Have them snug up the gap on this side, too.

***This set up is what I always use on socks, rather than shifting stitches and putting half on each side of the needles like some sock patterns do. When all the gusset and foot stitches are on one needle, it can be a little awkward at first, but really not too bad. Give it a try if you haven’t before! Or, feel free to do the gusset your favorite way.

Next:
Row A: knit across instep stitches; on foot side k 1, SSK, k across.
Row B: knit across instep stitches; on foot side, knit to last 3 stitches, k2tog, k 1.
Repeat these two rows until you have 20 stitches on the foot side.

***I wrote this out the way I did so students can see the pattern. I usually also show them how to tell whether they decreased on either end, by checking for two loops on the second stitch from the end. If there are two, you decreased on the last row and don’t need to now. If the second or second-to-last stitch looks normal, you need to decrease. I point out that many of us find it less stressful to not have to count or keep track of rows by “reading our knitting.”

Foot

Knit in the round until the sock is long enough to cover the tip of your little toe. You can try on your sock at any time by moving the stitches to the cable part of the needle. It will stretch.

***If your time is limited and you really want to show the students all the parts of a sock in one class, you can cut the foot short and go to the toe at any time. This will make a “class sock” that doesn’t fit a real foot, but has all the elements of a real sock.

Toe

Row A: k 1, SSK, knit to last 3 stitches, k2tog, K1; repeat on other half of round.
Row B: Knit.

***Ensure that the students are doing the decreases on BOTH sides of the sock.


Repeat these two rows until you have 8 stitches left on each half of the sock. Graft the 8 stitches together and fasten off.

***It helps to have an illustration for grafting. Use whatever technique works for you.

OR

Repeat these two rows until you have 10 stitches left, then repeat Row A only until you have 4 stitches on each half of the round. Cut the yarn, leaving a 10-inch or longer tail. Poke this yarn to the inside of the sock, and poke your needles to the inside as well. Turn the sock inside out and straighten the needles so they are parallel again. Then, use a spare double pointed needle to use the 3-needle bind-off technique to secure the 4 remaining stitches on each side of the sock.

***I find this method sturdier than grafting on worsted weight socks or any ones that are loosely knit. The bind off is not irritating to the wearer, either. Moving the yarn and needles to the inside of the sock is the trickiest part of this technique.

Weave in your ends, turn the sock right-side out if you need to, and admire your new instant socks.

***Let me know if you have any suggestions for improving this pattern or the teaching notes, please!

Copyright ©2008 Sue Ann Kendall

Tuesday, February 19, 2008

River Rock Slippers


I finally took better photos of this so I can share the pattern! Enjoy!

River Rock Slippers

These “adult booties” are the color of river rocks, and look like trendy ski boots, but much more comfy and cozy for lounging around the house. In this pattern you will get to practice a number of skills: circular knitting with the “magic loop” method, figure-8 cast-on, the make-1 increase technique, yarn-over eyelets, and knitting with novelty yarns.

Yarn:

You have two choices for the main color (MC):

Choice 1: Bertagna Filati Flauto color #0069 (45% wool, 35% acrylic, 15% kid mohair, 5% nylon) four 50-gr. skeins.
Choice 2: Muench Yarns Big Baby color #5505 (100% microfiber acrylic) four 50-gr. skeins.

For Contrasting Color (CC):

OnLine Linie285 Smash-Crazy color #004 (70% polyester, 23% polyacryl, 7% polyamid), two 50-gr. skeins (CC).

Note: Any super-bulky weight yarn can substitute for MC (and would not need to be knit doubled) OR any bulky weight yarn, doubled will work for MC. Any fuzzy or furry novelty yarn can substitute for CC. If you want to be able to machine wash and dry the slippers, use acrylic or superwash wool. 100% wool WILL felt if machine washed, and you will end up with teeny slippers! Also be sure to choose a CC yarn that will withstand the washing method you will use.

Needles: US Size 8 45” or longer circular needles, or needles that will get the right gauge—these booties are knit at a very tight gauge so that they will be sturdy and hold up to hard wear. One way to change the size is to use larger or smaller needles.

Notions: Row counter (optional). Crochet hook for making tie and pulling tufts of yarn to the outside. Measuring tape.

Gauge: 3 stitches per inch in stockinet stitch.

Finished size: To fit about a women’s size 7- 8 foot. Try larger needles to get a larger slipper, or you can cast on more and make the instep portion longer (you’d do more back and forth rows before going back to circular knitting for the cuff), but keep the cuff 36 stitches in circumference.


PATTERN

Sole: Cast on 48 stitches using a figure-8 cast on, holding 2 strands of MC together, if using Flauto or another thinner yarn. Start with a slip knot, then line up both ends of your circular needle in parallel. Wrap yarn in a figure 8 fashion around each needle in turn, starting with the needle without the slip knot. When there are 24 loops on each needle, arrange the needles so that the one with the slip knot is in back, and the other needle is in front. Note that you already have stitches arranged for “magic loop” circular knitting.

Slide the needle with the slip knot forward (so you can knit with it), leaving the other needle’s loops near the edge (this is the needle you would have wrapped next if you’d continued wrapping). Bring the yarn from the rear needle forward and use it to purl across the loops on the front needle. You will be at the end where your cast-on tail is, and this is where your rounds will begin. Use the tail as the marker, or pin a marker to remind you.

It’s a good idea to measure here. If the knitting is very close to 9” long (within 1/8 inch either way won’t matter), you are on track for a size 7-8 slipper. If it’s too big or small, you may wish to start again with a larger or smaller needle.

Round 1 first half: K1, M1, K23, M1, K1; repeat for second half of round, maintaining your loop (27sts each half)
Round 2: P
Round 3 first half: K1, M1, K24, M1, K2; second half: K2, M1, K24, M1, K1, maintaining your loop (29 sts each half)
Round 4: P
Round 5 first half: K1, M1, K24, M1, K4; second half: K4, M1, K24, M1, K1, maintaining your “magic” loop. There should be 62 stitches, 31 on each half of the loop.

Sides:
Starting with a purl round, work 10 rounds in garter stitch (knit one row, purl one row).

Instep: K36, slip 1, K2tog, PSSO, turn. It’s easiest to keep half the instep stitches on each side of your loop.
Row 1: slip 1 purl-wise, P10, slip 1 purl-wise, P2tog, PSSO, turn.
Row 2: slip 1 knit-wise, K10, Slip 1, K2tog, PSSO, turn.
It’s easiest to keep half the instep stitches on each side of your loop.
Repeat rows 1-2 six more times.
Slip 1 purl-wise, P10, Slip 1 purl-wise, P2tog, PSSO, wrap yarn around the next stitch on this round, turn, put the just-wrapped stitch back on the right needle, K11, work the next stitch together with a strand picked up from around below (to avoid a hole), K to end of round.

Cuff: K one round –when you get to the stitch with the wrap, work the stitch and the wrap together (preventing a hole).
Eyelet round: K1, YO, K2tog 12 times.
Knit 12 rounds in stockinet stitch (knit around).
If using thinner yarn, cut one strand of MC and pick up two strands of CC. You will finish the slippers using three strands, two of CC and one of MC.
Starting with a purl row, complete 9 rounds in garter stitch. Bind off as loosely as possible.

Make another slipper!

Ties (make 2): holding two strands of CC together, make a chain as long as desired. Thread through the eyelets. In the sample, the tie is long enough to wrap around and tie in the back, making for the look of a tassel at the heel.

Finishing: To get a “furrier” effect, you may want to use the crochet hook to pull strands of the trimmings from the CC to the outside of the slippers.

Abbreviations:
K = Knit
P = Purl
K2tog = Knit two together
P2tog = Purl two together
PSSO = Pass slipped stitch over the stitch previously worked
YO = Yarn over (wrap the yarn once without knitting, creating a new stitch and a “hole” in the knitting)
M1 = Make one (create a new stitch by inserting the needle in the bar of yarn between two stitches and drawing up a loop)
MC = Main color
CC = Contrasting color

These booties were inspired by a standard baby bootie pattern.

Copyright ©2006-2008 Sue Ann Kendall. This pattern may not be reproduced except for personal use. Rev 2.19.08

Monday, December 31, 2007

Don't Forget! I Need Lacy Wedding Ideas!

This post is going to sit at the top of the blog for a while, so I can implore, wheedle, cajole and beg my readers to keep my need for input into lacy wedding outfit ideas in mind while browsing the Internets. This blog post has the details and the collection of suggestions from readers, as well as an ongoing list of things I have run across.

I'm just asking you to keep an eye out for something that would look nice on a short, medium-weight currently red-headed woman who will be 50 at her wedding (I hate to admit that). I was thinking of wearing a lacy cardigan or jacket over a silk dress (the dress will be picked to go with the lace item). I would consider a shrug or maybe a shawl. The wedding will either be in the spring or the fall, and as far as we know will be outdoors (I would not survive an outdoor wedding in Texas).* So think not-too-hot, not-too-cold.

If you see anything on the web or Ravelry, post a comment on this post or The original blog post and I will be grateful! Thanks!

*Lee gets a vote in all these decisions, so I don't know exactly what we are doing until we get around to deciding.

Saturday, December 8, 2007

Very Warm Linen Stitch Scarf with Bobble Fringe


Linen Stitch Scarf
Originally uploaded by sunasak

This scarf hung in my local yarn store for a long time, and I sold copies of the pattern. I've decided to share it, instead, so please enjoy. As always, let me know in the comments if you find any mistakes or have any questions.

Materials: Diakeito Diadomina 50% wool, 21% mohair, 29% nylon yarn, 6 40 gram balls.

Needles: circular or double pointed needles, size 7 OR size to get gauge and appropriate for how you like to knit in the round. 5 double pointed needles for traditional knitting in the round, or two 24” circulars for two circular method, or one 47” or larger circular for Magic Loop.

Gauge: 25 stitches = 4 inches (6.25 stitches per inch)

Construction Notes: Scarf is knit predominantly in the round using linen stitch. When the main body of the scarf is complete, you close the ends up to make a two-layer rectangle, then knit a simple back-and-forth border with really fun, yet easy, bobbled fringe that makes for lots of swingy fun when worn. The yarn is a beautiful self-striping mohair blend that seems to never repeat itself—mesmerizing!

Directions: Cast on 68 stitches using your favorite provisional cast on. (Later, you will pick up the ends of these stitches for the border.) Divide the stitches into quarters (17 stitches per needle) if using 5 double pointed needles. Divide in half if using two circulars or the magic loop. If using one smaller circular needle, place a marker for the beginning of rounds.

Start linen stitch pattern:

Row 1: Slip 1, K to halfway; Slip 1, K to end of round
Row 2: K1, *slip1, slip 1 with yarn in front,* repeat to halfway; K1, *slip1, slip 1 with yarn in front,* repeat to end of round
Row 3: repeat row 1
Row 4: K1, *slip 1 with yarn in front, K1* repeat to halfway; K1, *slip 1 with yarn in front, K1* repeat to end of round

Repeat rounds 1-4 until scarf is approximately the height of the intended owner—that makes it fall to their hips when draped around the neck. Or knit to desired length, making sure you have at least half a ball of yarn left for the borders. The slip stitches at the beginning and halfway marks will make a natural folding place, like a fake seam down the sides of the scarf.

Border A: You will need three needles to close off the scarf ends, two to hold the stitches and one to knit them with. Align each half of the stitches (front and back of scarf) in parallel (if you were using 5 needles, but half on each of two needles, and use a third to knit). Knit across, knitting one stitch from each needle each time. You will go from 68 parallel stitches to 34 stitches.

Knit 5 more rows in garter stitch for border.

Start Fun Bobbled Fringe: Cast on 19 (a cabled cast on works best), then make bobble.

Bobble: Row 1: Into last cast-in stitch, KI, P1, K1, P1, K1—5 stitches on needle.
Row 2: Sl 1, P4
Row 3: Sl 1, K4
Row 4: Sl 1, P4
Row 5: Sl 1, K4
Row 6: Sl 1, P4
Row 7: Sl 1, K4
Row 8: Sl 1, P4
Row 9: K2tog, K1, K2tog
Row 10: K3tog

When bobble is complete, cast off remaining stitches. When you get to the last cast on stitch, knit it together with the next scarf stitch, then cast off one (the idea is you will have one bobbled fringe for every two stitches on the scarf).

Repeat fringe instruction above until only two stitches are on the needle, K2tog and end off.

Border B: Now you need to make a matching border on the end where you started. Remove provisional cast on and put the live loops on, with the front stitches on one needle and the back stitches on another. Align as for Border A and close off the scarf edge as in Border A. Note that you will probably have an odd number of stitches, due to picking up from the cast on edge. Just bring up a loop on the odd half and knit it together with the final stitch on the half with an even number of stitches to nicely close off the scarf end. Complete Fun Bobbled Fringe as above.

Copyright ©2006 Sue Ann Kendall. This pattern may not be reproduced except for personal use.

Friday, December 7, 2007

Preview of New Pattern AND I Posted Another


Linen stitch
Originally uploaded by sunasak

I hope this photo intrigues you and makes you want to know more about the next item I'm going to post the pattern for. I've been meaning to share this one for quite some time! As you can see, the yarn is luscious and the stitch pattern is a very interesting one. And it's perfect for this time of year--it is a VERY warm item! Here in Texas, it's mostly decorative--in fact, it lived at a yarn store for a year when I was selling the pattern there.

I realized I had sort of written up instructions for the Glacier Lake Socks I knitted this summer, so I went ahead and finished them up, and have posted that pattern as well. the instructions are dated back in July, when i did the sock, but it is also listed in the sidebar under free patterns, so you can find it easily if you ever want to make a simply patterned sock with a very interesting heel (borrowed liberally from another sock I knitted, only resized and tweaked).

As always, if you make them and find an error, do let me know!

Knittin' Progress

I am churning away on a gift that I can't go into here, and got some more done on Juno Regina yesterday. I can do about an inch at a time of that before going numb. So, it will take a while with those small needles and teeny thread. But it's pretty!! Tomorrow I hope to get yarn for the kids' gifts, and start them.

Wednesday, December 5, 2007

Rainy Day Sock Pattern


Rainy Day Sock detail
Originally uploaded by sunasak
Here it is, the Rainy Day Sock pattern. Please let me know if you find any mistakes or have any trouble understanding the instructions, so I can make corrections. And if you knit them, please send me a picture.

Rainy Day Socks
This sock is based on two patterns from the Harmony Guides. The neat thing is that each pattern has a twelve-row repeat, so it's easy to keep track of what row you are on, even when doing both patterns.
In the new edition edited by Erika Knight, the patterns are Parasol Stitch on p. 74 (modified) and Raindrops, on p. 111 (also modified and with twisted knit stitch border added). The yarn I used on the original socks was mostly blue, like water, with a little green, and featured shiny silver strands, making it look wet. Socks for a rainy day!
Materials: Blue sock yarn. I used Schoeller and Stahl Fortissima Colori Socka Disco Colori, Color 01. This has been discontinued, so use any sock-weight yarn that looks rainy to you and gives the right gauge. It will look a LOT better in a solid or semi-solid yarn, so you can see the patterning.
Gauge: 9 stitches per inch.
Needles: Use whatever needle gets you this gauge. I needed a 00 with my yarn, but most people will probably need a 1 or 2. Whatever needle works best in 64-stitch socks for you will work fine.
Directions
I assume you are using the magic loop method or two circular needles. If you are more comfortable with four double pointed needles, put half of each side on each needle; there are an odd number of stitches on each side, so put one more stitch on two of the needles.
Cast on 28 stitches, 14 per needle, using your favorite invisible cast on, such as Figure 8, Turkish, backward loop (here are my instructions) or Judy's Magic Cast On.
Increase one stitch at each end of the needle every other row until you have 64 stitches. Options include knitting into the front and back of the edge stitch, working a Make 1 (M1)between the first and second stitches and next-to-last and last stitches on each needle, or doing paired lifted increases on each end. I use the M1 method, since my M1s are practically invisible.
On the last row of plain knitting, set up for the pattern on the first needle (this will be the instep). On the last row of plain knitting, set up for the pattern on the first needle (this will be the instep). K8, place marker, K8, M1, K8, place marker, K8. The other needle will be your sole. K16, M1, K16. 33 stitches on each side for a total of 66 stitches. The other needle will be your sole. K16, M1, K16. 33 stitches on each side for a total of 66 stitches.
Start parasol pattern (see below).
Knit to marker, knit row 1 of parasol pattern, knit to end of instep. Keep foot in stockinette, Continue knitting the parasol pattern on the instep.
Shape Gusset
When foot measures approximately 3" short of desired foot length, start gusset. Continuing in parasol pattern on the instep, increase one stitch at each end of the sole needle every other row. I used paired lifted increases, with a right-slanted increase on the right and a left-slanted one on the left. I did the increase on the second stitch from the end. You can use M1 (Make 1) or Kfb as well. Continue until you have a total of 55 stitches on the sole needle.(Don't worry about where you are on the parasol pattern. No matter where you end up, you will start new parasols on the back of the socks when you get to your next row 1.)
Turn Heel
Working back and forth on only the foot stitches:
Row 1: (RS) K 37, Kfb, K1, wrap and turn
Row 2: (RS) P 22, Pfb, P1, wrap and turn
Row 3: (RS) K 20, kfb, K1, wrap and turn
Row 4: (RS) P 18, Pfb, P1, wrap and turn
Row 3: (RS) K 16, kfb, K1, wrap and turn
Row 2: (RS) P 14, Pfb, P1, wrap and turn
Row 3: (RS) K 12, kfb, K1, wrap and turn
Row 2: (RS) P 10, Pfb, P1, wrap and turn
You will have 63 stitches in total. On RS, knit to end of the needle, knitting each wrap together with the stitch it wraps. Knit across instep stitches, keeping in Parasol pattern.
Heel Flap
Row 1 (RS): K47 (knitting each wrap together with the stitch it wraps), SSK, turn
Row 2: Slip 1, P 31, P2tog, turn
Row 3: [Slip 1, K1] 16 times, SSK, turn
Repeat rows 2 and 3 until all side stitches have been worked.
Rearrange for Leg
Move all stitches before the first marker on the instep to the heel needle (this is easy in Magic Loop--just change where the loops are by putting all the stitches together then re-pinching to make new loops where you want the half-rows to end). K across all these stitches, knitting two together where the heel and instep stitches meet.
Knit the next row of the Parasol pattern. Move the first 8 stitches of the heel needle onto the instep needle. Knit across these stitches, knitting two together where the heel and instep needles used to meet (neaten up if you think a hole might form).
(If you are using DPNs, you could put one pattern on each of four needles. That would make it easy to tell where you are.)
You should have 32 stitches on each needle (if not, adjust on the next row). One is the front (it has the pattern on it) and one is the back. The first 17 stitches on each needle will be worked in the Parasol pattern, and the second 15 stitches will be worked in the Raindrop pattern. Place markers between the patterns.
Until you reach row 1 of the Parasol pattern on the front, K across the 17 Parasol stitches on the back of the sock. Until you reach either row 1 or row 7, purl across the 15 stitches of the Raindrop pattern. You can start the Raindrop pattern on either Row 7 or Row 1. When I made mine, I only had to do this for two rows, because my last Parasol row had been Row 10. What row you end up with will depend on your foot size and your row gauge, so it will vary.
Establish Leg Patterns
At your next Row 1, start the Parasol pattern in the section with a K background and the Raindrops pattern in the section with the purl background. Though you have shifted the needles, the parasols will be centered on the front and back of the sock, and the raindrops will be centered up the sides. From now on, it's easy!
I moved the last purls of the Raindrop pattern to the beginnings of each needle so I would not have to start a needle with a YO on Row 1, but if you are comfortable starting with a YO, you don't need to do this.
Continue until the legs are as long as you want, probably between 6 and 8 inches long, ending at Row 12. Do the following finishing rows:
Row 13: In the Parasol sections, K 6, YO, SSK, K1, K2tog, YO, K6. In the Raindrop pattern, keep the twisted Knit stitches going, but Purl all other stitches.
Row 14: In the Parasol section, K7, Do the centered double decrease, K7. In the Raindrop pattern, keep the twisted Knit stitches going, but Purl all other stitches.
Ribbing
Finish with a K1, P1 ribbing. It looks nice to twist the knit stitches. I did 8 rows. Note that the Parasol pattern will cause the socks to dip festively in the front and back.
PARASOL PATTERN (17 stitches--only rows 11 and 12 will have accurate stitch count)
Row 1: YO, (K1, P3) 4 times, K1, YO
Row 2 and all even rows: K
Row 3: K1, YO, (K1, P3) 4 times, K1, YO, K1
Row 5: K2, YO, (K1, P3) 4 times, K1, YO, K2
Row 7: K3, YO, (K1, P2tog, P1) 4 times, K1, YO, K3
Row 9: K4, YO, (K1, P2tog) 4 times, K1, YO, K4
Row 11: K5, YO, K1, (Centered double decrease,* K1) twice, YO, K5
Row 12: K
*Slip two stitches together as if to knit, knit 1, pass the two slipped stitches over the stitch you knitted..
RAINDROP PATTERN WITH BORDER (15 stitches)
Row 1: P1, K1tbl, P5, YO, P2tog, P4, K1tbl, P1
Rows 2-6: P1, K1tbl, P5, K1, P5, K1tbl, P1
Row 7: P1, K1tbl, P2, YO, P2tog, P4, YO, P1, K1tbl, P1
Rows 8-12: P1, K1tbl, P2, K1, P5, K1, P2, K1tbl, P1
Abbreviations
K: knit
P: purl
Kfb: knit into the front and back of the stitch
Pfb: purl into the front and back of the stitch
M1: make one
YO: yarn over
P2tog: purl two together
Special Stitch
Centered double decrease: Slip two stitches together as if to knit, knit 1, pass the two slipped stitches over the stitch you knitted. This makes three stitches into one, and keeps the center stitch at the foreground.
Copyright 2007 by Sue Ann Kendall. Permission is granted to reproduce this pattern for personal use only.

Friday, September 21, 2007

Refresh My Memory...


Dishcloths for my sister
Originally uploaded by sunasak
Since neither project I am currently working on looks any different from a picture I already posted (that would be the beginning of my second green Walking Away Sock and the front of the surplice top, which has all the lace panel and about 1/3 of the first surplice done), I am sharing the only photo I can find of something that passes for a beginning knitting project: the dishcloths I made my sister for Christmas last year.

OK, so I made them from Schaeffer cotton yarn that retails at nearly $40 a skein, so they aren't beginner Sugar-n-Cream models, but they are simple knit-and-purl patterns. Loved the yarn, by the way. Made very sturdy cloths with a bit of sheen. All I can remember is that I had so much going on (sudden pick up in love life, for one) that it took me way longer to make 4 discloths than I had hoped--the Flickr site reveals I took this photo on December 25, so I must have not finished until the day I gave them away! I have leftover yarn enough for another, too, which would make the expensive skein actually crank out $4 dishcloths after all.

But, here is my dorky question. I got to yet another set of instructions (in the Nashua pattern book for the surplice top) telling me to decrease X number of stitches "evenly spaced" across the row. WHY can't they say "decrease every X stitches" so you'd know how often to decrease? Why do we have to figure that out for ourselves? And, have I forgotten the "magic" way to calculate this (I am just sure I read such a thing once). I know that if you decrease once on each end, that takes care of two of them. But what's the formula for figuring out how many stitches to put between each decrease?

Or, do they say this mainly because you have to do is somewhat irregularly? On mine if I knit the first two together and then K5, K2tog to the end, I came out with two few decreases. I ended up doing them on the next row, hoping the Knitting Police would not come by and see. I must have done that on the other side, too, but it was in June, so I forgot.

I am feeling a bit dim, but willing to learn (not willing enough to post this question to an email list, though).

I have a LOT of knitting time tonight and over the weekend, so I am hoping to make good surplice and sock progress. And I am working on the next beginning knitting teaching tips, too!



UPDATE: Woo! Post and you shall receive! The kind and gracious Katie K has posted in the comments this helpful link to a calculator that will answer my questions (and yours, if you also wonder how to calculate decreases). Thanks to the Knitting Fiend for making this calculation helper, too. I just love the blogosphere and its helpful residents.

Wednesday, September 19, 2007

Lucy Bag for Crochet


I was asked on a non-knitting email list if it was possible to crochet a Lucy Bag, since there are members of the list who simply don't want to learn to knit (picture is a sample of one I knitted). Also one of them has great difficulty with commercial instructions, so they wanted it "conversation style." Here is what I came up with. If you spot any obvious flaws, let me know. These are more "guidelines" than instructions, but might be useful to someone!

Lucy Bag for Crochet

Using 100% NON superwash wool, crochet a flat circle that is 1/3 larger than the ultimate diameter you want. I'd probably double the yarn and use like an I hook, double or maybe half double crochet. You want there to be spaces so that the felting happens better. It will look loose.

After you hit the diameter, stop increasing and just crochet along with the same number of needles. The sides will start forming. Make it 1/3 longer than you want in the end.

For the handles, I'd eyeball them. Pick up about 15 or so stitches at one point and make a rectangle 10 inches long. Attach the second end of it about two-three inches away from the first, making a fairly short loop. Then on the other end of the bag, sort of parallel, pick up the same number and crochet a 40-inch rectangle (these are the lengths from the knitting pattern). Attach that one a few inches from the first. Viewing a clock face as your circular bag, the attachments would be like at 11 and 1 on the clock and at 5 and 7 on the clock.

Felt the bag by washing in very hot water in a top-loading machine, highest possible agitation. You may need to run it through more than one cycle. To reduce lint, you might want to put the article in a pillowcase, securely fastened, but that makes it harder to check how felted the bag is.

To fasten, the long loop passes through the shorter one, then you can wear it on your shoulder.

The above is not based on actually crocheting one of these. Just an educated guess.

Copyright 2007 by Sue Ann Kendall. Thanks to Jodie Lucas for input.

And if you knit, buy a copy of the Lucy Bag pattern. It's by Two Old Bags and can be found many places on the Internet.

Monday, July 23, 2007

Glacier Lake Toe Up Sock Pattern


Better late than never, here's the Glacier Lake Sock pattern all written out. I have also posted it to Ravelry.





Glacier Lake Toe-Up Socks

I saw the stitch pattern on a baby blanket a woman was making in the Austin, Texas airport one day, and thought it would make a great sock pattern. This is the second pair I made using the pattern. It will look good with any yarn, and at any length. The socks’ name comes from the colorway, which was named after a photograph of logs on a lake at the base of a glacier by Ray of Knitivity.com

The short-row gusset heel is a slight modification of the one I first encountered in the sock
Coupling from Knitty, and it’s become a favorite of mine. Try Coupling if you’d like to make another sock with a similar heel.

Materials: Knitivity Down Home Sock yarn (4 ounces/approx 113 grams, 480 yards), 1 skein, Glacier Lake colorway.

Needles: Whatever needle gets you 7 stitches per inch. Probably size 1-2.

Gauge: 7 stitches per inch (that’s 28 stitches per 10 cm for you metric people)

Directions

Use magic loop, two circulars or DPNs, whatever circular knitting method you like.

Cast on 14 stitches in Judy’s Magic cast-on, figure-8 cast on, Turkish cast-on the backward loop method, or any other method that creates a seamless toe.

Toe

Increase on each end of each side every other row until you have 64 stitches. I usually use M1 after the first stitch and before the last stitch on each end of a side.

Foot

Work in this pattern on the instep stitches:

Rows 1-4: P2, K3, ending with a P2
Row 5: Purl across
Repeat rows 1-5 for pattern.

Work in plain stockinette (K every stitch) on the sole stitches. When sock is three inches shorter than the desired length, start the gusset.

Gusset

Increase Round: Work an M1 increase one stitch after the first stitch and one stitch before the last stitch on the sole side of the sock.
Plain Round: Work 1 round in established pattern.

Repeat these two rounds until there are 58 stitches on the sole needle.

Turn Heel

The heel is worked back and forth on the needle with the sole stitches.

Row 1 [RS]: K 39, turn work.
Even-numbered Row 2-10 [WS]: Sl 1, P19, turn work.
Odd-numbered Rows 3-9 [RS]: Sl 1, K19, turn work.
Row 11 [RS]: Sl 1, K17, W&T (wrap and turn).
Row 12 [WS]: Sl 1, P15, W&T.
Row 13 [RS]: Sl 1, K13, W&T.
Row 14 [WS]: Sl 1, P11, W&T.
Row 15 [RS]: Sl 1, K9, W&T.
Row 16 [WS]: Sl 1, P7, W&T.
Row 17 [RS]: Sl 1, K7, [K next stitch together with its wrap, K1] 3 times, pick up and knit 5 stitches (1 stitch in each slipped stitch) along edge of flap. Turn work.
Row 18 [WS]: Sl 1, P18, [P next stitch together with its wrap, P1] 3 times, pick up and P 5 stitches (1 stitch in each slipped stitch) along edge of flap. Turn work.

You will now have 66 stitches on the sole needle 28 heel flap stitches, and 19 gusset stitches on each side of the flap stitches.

Row 19 [RS]: [Sl1, K1] 13 times, sl 1, SSK. Turn work.
Row 20 [WS]: Sl 1, P26, P2tog. Turn work.
Repeat rows 19-20 until there are 32 stitches on the sole needle.

Repeat row 19 once more, but do not turn work.

Leg

When the heel is done, increase one stitch somewhere unobtrusive on the back of the sock (M1 works well) so that you will have 65 stitches (the stitch pattern in the round is a multiple of 5 stitches) in total, and proceed to do this pattern:

Rows 1-4: P2, K3
Row 5: P

Repeat Rows 1-5 in rounds until the sock is as long as you want it to be. Bind off loosely after completing a Row 2.

Copyright 2007 by Sue Ann Kendall. This pattern may not be reproduced for sale.